I had knit an Elephant and a Lion
Top This! hat, kits from DMC described in
my 1/20/19 post. They made up so quickly, I bought five Santa
Top This! hats from DMC and five Elf
Top This! hats from DMC to knit for Christmas for my grandchildren. I described their arrival in my
post dated 2/6/19. So I thought, "Why not celebrate a little Christmas in July by starting to knit them up?" I certainly will not write ten post for ten hats but I could capture all the Santa progress in one post.
Saturday, July 6, 2019: Santa Hat #1
Sizing re-adjustment came first. I learned that the Elephant hat had fit the 3 year old quite well but the Lion hat had been a bit small for the 6 year old. I had made a size that cast on 60 stitches and had used size 8 knitting needles, smaller than the size 9 recommended because I tend to knit loosely. The instructions on the the label were for an infant and a child size. My grandchildren's ages as of December 2019 will be 7¼ and 4½, and 5⅔, 3⅔, and 1⅔. For these Santa Hats, I went back to the size 9 needle recommended and cast on 72 stitches as specified in the free instructions for a small adult size downloaded from
https://www.dmc.com/media/usa/Top_This_Alternate_Size_Instructions.pdf.
I was concerned that since this larger size had not been included on the label, the kit might not have enough yarn to complete the hats. When I had made the Lion and Elephant hats with 60 stitches, they fit on three size 8 double pointed needles, 20 stitches each. When I cast on 72 stitches instead of 60 on three size 9 double pointed needles, the fit for 24 stitches was more squashed together and it was more likely I would drop stitches off the ends. Although it was convenient to have those white markers midway, the risk of losing stitches outweighed the reminder of midway markers. I decided it would be better to share the stitches among four needles instead of three.
I switched to four double pointed needles with 18 stitches on each needle, with white markers counting off every 12 stitches. This configuration was roomier. Although I did not need the markers until the decrease rounds, they made a nice visual as a check that I had not dropped any stitches – 6 stitches on one side of the marker, 12 on the other side.
The hat started out as red but quickly rotated through the red and silver/whit two tone and then the black. After the 16 rounds of stockinette stitch after the 12 rounds of ribbing, the yarn change from solid red back to the alternating red and silver/white. I eyed the ball of yarn wondering if I would have enough. My backup plan if I ran out was to finish off the tippy top with black or white or red yarn of my own.
The alternating red and silver/white colored yarn as it came off the skein reminded me of the way radio towers are painted so they are more visible to planes.
After 20 rounds, still at 72 stitches, the decreases would begin. I breathed a little easier since my yarn would go a little further once I began to decrease 6 stitches each round.
Here is the knitted hat with the small amount of black yarn remaining. I did have enough. It will be interesting to see how the striping pattern turns out on the other four Santa hats.
Monday, July 8, 2019: Santa Hat #2
For the second hat I guessed better at how much yarn I needed to cast on and the residual tail is much shorter. Also in this hat, the yarn ball began with the red and white/silver alternating yarn, not the solid red. Only five rounds into it, the black yarn entered the picture.
The yarn still followed the same sequence with back unfurling before the solid red followed by the red and white/silver alternating portion. I found these balls were best unwound from the outside rather than from an inner core and a wooden salad bowl provided just the right container to keep it from rolling away.
After twenty-one rounds of stockinette stitch, the black made its appearance again. In Santa Hat #1 there was only a small black patch at the very top. This Santa Hat #2 has a second black stripe.
Here is the completed striping pattern for Santa Hat #2. Confident now that I would have enough yarn for each hat in the supplied ball, I no longer felt compelled to document what yarn remained.
Tuesday, July 9, 2019: Santa Hat #3
The yarn ball for the third hat started with red but this time a lesser yardage than Santa Hat #1 so the two tone section began sooner .
Curious to see the striping pattern, here is the pattern forming after 12 rounds of ribbing and again after 21 rounds of stockinette stitch before starting the decreases.
The hat has only one black stripe unlike hat #2. At the top of the crown of the hat there is a black area. The contrast will show up the Santa head very well.
Thursday, July 11, 2019: Santa Hat #4
Looks like Santa Hat #4 will start with the two tone yarn, like Santa Hat #2 did. Most likely it, too, will wind up with two black stripes.
The following photos show that progress after round 12 where the ribbing ends and the stockinette stitch starts and round 21 when the stockinette stitch starts the decrease rounds at the crown.
Completed Santa Hat #4 has two black stripes as predicted and a completely red crown with a small ball of the two-tone yarn left.
Here is what the hat looks like on the inside when the Santa head has been attached. The ribbons on the Santa are passed through two holes on a foam "button" to stabilize the head. Tying a bow instead of a knot allows the Santa topper to be removed for laundering. It is made out of washable materials but I suspect it would take longer to dry than the hat.
Friday, July 13th - Saturday, July 13, 2019: Santa Hat #5
I actually started this hat on Friday July 12th but had other commitments besides knitting so I did not complete it until Saturday. (A phone call from my sister had alerted me that she had finished reading book #4. She did admit that she had stayed up until 4:00 am and that her eyes were burning. The race was neck and neck.) By the starting sequence with which the ball of yarn had been wound I knew the starting ribbing would be red and that the hat would have only one black stripe.
Again I document the progress after the ribbing is completed at round 12 and after the straight stockinette rounds are completed after an additional 21 more rounds.
After my quilt guild meeting Saturday afternoon, July 13th, I rushed home to complete Santa Hat #5. I texted a "proof of completion" photo to my sister at 8:55 PM, not even taking the time to correct the orientation. (The 7:14 time is when I took the screen capture of my cell phone on Sunday to write this post.)
Here is the orientation corrected. The striping sequence is best viewed in this photo. One household has two grandchildren and the other has three grandchildren. I think I will send the two double black striped hats, Santa Hat #2 and Santa Hat#4, to the two-grandchild household. The other three I will send to the three-grandchild household and the width of red on the bottom edge can determine which child gets which: thinnest red #3 to youngest child, medium wide red #1 to middle child, and widest red #5 to the oldest. My sister teased, "Which hat do you like best and which grandchild do you like best?" I ignored answering that impossible question.
Sunday, July 14, 2019: Final Photos
I wanted a picture of the five Santa hats sort of plumped out as they would be when worn and here it is. I put the hats on bowls to fill them out. Don't they look like an adorable crew? I almost hate breaking up the gang.
This is the counter top setup I used to deploy that varying height array of Santas. I gathered and used five ceramic bowls, three graduated height candle holders, and a few clear glass bowls with a few clear different size glasses stacked to further vary the heights. My husband looked at the kitchen counter and burst out laughing. I'd forgotten I'd bought that trio of multicolored pillar candle holders. I will have to find a place to display them.
This is the remnant yarn from each ball, set along side my 7" long (point to point) double pointed needle for scale. Even with the leftovers from five hats, the combination is not enough for a sixth hat – not that I am dying to do this one more time, mind you! Enough is enough.
My tools of the trade were the size 9 double pointed needles, a crochet hook for picking up the occasional-bordering-on-often dropped stitch, four white stitch markers, a yarn needle and small scissors. Those small white dots are the holes poked out from the soft foam disc placed on the underside of the hat where teh Santa ribbons pass through and tie into a bow. There are six in the photo, and not ten as there should be. The other four are probably on the floor somewhere unless the dog has eaten them already.
My official finish time for completing five hats was Saturday, July 13, at 8:55 PM. This does not included time for the staged photography session of the completed hats nor writing up of this post which I did on Sunday. My sister finished the fifth book Sunday, July 14, approximately 9:12 PM Pacific Standard Time or just after midnight her time, concurrent with me writing this post. Technically, I won the race; but I am most assuredly very grateful to my sister for proving me the incentive to complete five hats in one week's time, Saturday to Saturday. I did also lead my normal life while knitting – for the most part.
I now have five Elf hats to complete but I am taking a break for a while. Those 4th of July decorations are not putting themselves away. Maybe Christmas can come again in August bringing with it another incentivized challenge for knitting five Santa's helpers. I am linking up now with
Main Crush Monday MCM#160 at Cooking Up Quilts.
